Seal Gasket
Seal Packing
Seal Sheet
seal Tools
PTFE Products
Graphite Products
Ceramic Products
Fiberglass Products
Rubber Products
Fasteners,bolt,nut

 

 
Add: Zonghan Industry Zone ,
       Cixi City, Zhejiang Province,
       China
       P.C: 315301
Tel: 0086-574-63392037
E-mail:Sales@sinston.com
          Martin7757@hotmail.com
Http://www.sinston.com
 

Name: PTFE Gasket

PTFE Gasket

SINSTON G4200 Pure PTFE Gasket

 

Description:
PTFE Gasket is molded or skived or cut from virgin PTFE powder or compounds, sheets, rods, tube etc. It has the best chemical corrosion resistance among known plastics. Without being aging, lowest friction coefficient, wear resistance. The unloaded operating temperature range is -180~+260C. 
CONSTRUCTION:
SINSTON PTFE gasket used filler materials such as glass fiber, carbon fiber and graphite etc. The filled PTFE has improved compression strength, better abrasion resistance, high thermal conductivity and lower thermal expansion compared with pure PTFE products.
Several types of PTFE gaskets are produced to meet the most demanding application
APPLICATION:
SINSTON PTFE offers a wide range of compounded products with good mechanical properties, electrical properties, thermal properties, chemical resistance, low friction coefficient and good resistance to wear. They can be mostly used in valve seats, bearings, requested to resin sliding and chemicals, elastic band for unlubricated compressors. An extended range of improved mechanical and processing properties can be additionally reached by combination of virgin PTFE and different fillers.
Different combination offers a variety of different properties described in the following table.

Filler Improved properties
Glass
Enhance wear resistance
Chemical resistance
Graphite
Extremely low coefficient of friction
Fairly good compressive strength
Good wear resistance
Carbon
Good thermal resistance
Resistance to deformation
Bronze
Enhanced compressive strength
Good wear resistance
High thermal conductivity


 

Name: PTFE Enveloped Gasket

PTFE Enveloped Gasket

SINSTON 6600 PTFE Enveloped Gasket

 

 

Type & Structure
No. Cross secrtion Description
A V Type, 
PTFE dise slit in center from outside
B U Type, 
PTFE type heat sealed at one joint
C L Type, 
PTFE sheet machine cut to envelope form
 
Service Range
Material of Jacket Cross section Temperature
( <C )
Pressure
( Mpa)
Asbestos Joint Sheet 150 1
Non-asbestos Joint Sheet 200 2
Asbestos Joint Sheet between layers of Asbestos millboard 220 2.5
Non-asbestos Joint Sheet between layers of Non-asbestos millboard 220 2.5

 

Name: PTFE Boned EPDM Gasket

PTFE Bonded EPDM Gasket

SINSTON 6600E PTFE Bonded EPDM Gasket

Description:SINSTON 6600E PTFE bonded EPDM Gasket is compound of PTFE & EPDM rubber

SINSTON PTFE offers a wide range of compounded products with good mechanical properties, electrical properties, thermal properties, chemical resistance, low friction coefficient and good resistance to wear. They can be mostly used in valve seats, bearings, requested to resin sliding and chemicals, elastic band for unlubricated compressors. An extended range of improved mechanical and processing properties can be additionally reached by combination of virgin PTFE and different fillers.

Different combination offers a variety of different properties described in the following table.

 

Home | About SINSTON | Contact Us | Post Office | Admin  
Copyright © 2015 By WWW.SINSTON.COM All Rights Reserved
寃ICP姥07503191催