Spiral wound Gaskets
Ring Joint Gaskets
Reinforced Graphite Gaskets
Kammprofile Gaskets
Copper Gaskets
Metal Flat Gaskets
Metal O Ring
PTFE Gaskets
PTFE Enveloped Gaskets
Expanded PTFE Joint Tape
Non-asbestos Gaskets
Asbestos Gasket
Easy Gasket Cutter
Braided Carbon Sleeving
Carbon Packing
PTFE Packing
Graphite Packing
Kevlar Packing
Nomex Packing
Kynol fiber Packing
Ramie fiber Packing
Arcylic fiber Packing
Asbestos Packing
Packing Cutter
Packing Tool
PTFE Products
Graphite Products
Fiberglass Products
Ceramic Products
Rubber O Ring
Rubber Sheet
Mica Sheet
PTFE yarn for making PTFE packing
Graphite Filler for making SWG
PTFE Filler for making SWG
Ceramic filler for making SWG
Flat/V shape metal tape for SWG
Metal Bend Coil for SWG
Inner ring & Outer ring for SWG
Full Thread Bolt
Double End Stud
U Bolt
Hex Bolt
Nut
Washers
   
Home/Products/Seal gasket
Name: Kammprofile Gasket/Serrated Gasket
Item: SINSTON 6400
Photo:
Description:Kammprofile Gasket (Serrated Metallic Gasket) consist of a metal core, generally stainless steel with concentric grooves on both sides. A sealing layer is usually applied on either side and depending on the service duty the material for this layer can be expanded graphite, PTFE, Asbestos free gasket sheeting materials or some soft metal. It can be used without sealing layers to provide an excellent sealing but there is a risk of flange surface damage especially at high seating pressure.

 
SINSTON 6400 Basic Type Kammprofile Gasket
SINSTON 6400 JR Kammprofile Gasket with integral Outer Ring
SINSTON 6400 SJ Kammprofile Gasket with Loose Outer Ring
 
Depending on centering ring with cheaper material (Normal: CS) and thinner thickness (Normal: 1.5mm) for Style 104 SJ, maybe it is more economical than 104JR.
 
APPLICATION: 
 
Kammprofile gasket is the preferred gasket when improved performance at low seating stresses is required. It features excellent anti-blow-out properties linked with the reliably of a solid metal-to-metal seal combined with a soft sealing face to provide a tighter joint.  It is particularly suitable for applications where high temperature, pressures and fluctuating conditions are encountered. Non-metal cover layers ensure that flanges are not damaged, even at extreme loads. This gasket is an ideal replacement for problem applications associated with jacketed gaskets, for heat exchangers, vessels and reactors and various flange connections. Pressure: (6.4~25Mpa)
MATERIAL:
 
Metal material
Din
Material No.
Hardness
HB
Temp.
 ≧
Density
g/cm3
Thick.
mm
CS/Soft Iron
1.1003/1.0038
90~120
-60~500
7.85
2
3
4
SS304, SS304L
1.4301/1.4306
130~180
-250~550
7.9
SS316, SS316L
1.4401/1.4404
130~180
-250~550
7.9

Other special metal is also available on request.
Materials for the faces:
Flexible Graphite, PTFE, Non-asb, etc
Normal with thickness 0.5 mm

 

 

SINSTON 6300 Corrugated Metal Gasket




 

      Copyright @ 2014-2015 Sinston Sealing Material Factory. all rights reserved.                                                 Phone: +86 574 63392037   Fax:63441698
      Address: ,Zonghan Industrial Zone, Cixi City, Zhejiang, P.R. China                                                              E-mail: Sales@sinston.com  
Martin7757@hotmail.com