Spiral wound Gaskets
Ring Joint Gaskets
Reinforced Graphite Gaskets
Double Metal Jacketed Gaskets
Kammprofile Gaskets
Copper Gaskets
Metal Flat Gaskets
Metal O Ring
PTFE Gaskets
PTFE Enveloped Gaskets
Expanded PTFE Joint Tape
Non-asbestos Gaskets
Asbestos Gasket
Easy Gasket Cutter
Braided Carbon Sleeving
Carbon Packing
PTFE Packing
Graphite Packing
Kevlar Packing
Nomex Packing
Kynol fiber Packing
Ramie fiber Packing
Arcylic fiber Packing
Asbestos Packing
Packing Cutter
Packing Tool
PTFE Products
Graphite Products
Fiberglass Products
Ceramic Products
Rubber O Ring
Rubber Sheet
Mica Sheet
PTFE yarn for making PTFE packing
Graphite Filler for making SWG
PTFE Filler for making SWG
Ceramic filler for making SWG
Flat/V shape metal tape for SWG
Metal Bend Coil for SWG
Inner ring & Outer ring for SWG
Full Thread Bolt
Double End Stud
U Bolt
Hex Bolt
Nut
Washers
   
Home/Products/gland Packing
Name: Kevlar fiber Packing with PTFE & silicone oil impregnation
Item: SINSTON2200
Photo:

 

Description:Braided from high quality Dupont Kevlar fiber with PTFE Impregnation and lubricant additive. Extremely hard wearing. It shows good chemical resistance, high elasticity and very low cold flow. It is wear resistant but may damage the shaft if not used properly. A minimum shaft hardness of 60HRC is therefore recommended. Compared with other kinds of packing, it can resist more severe media and higher pressure. The packing is also lubricated with a silicone-based compound for quick and easy break-in.

 
SINSTON2200L Kevlar fiber packing with an inert lubricant
Without PTFE impregnation, An extremely durable, highly abrasive resistant packing, It is ideal for slurry service application.
 
APPLICATION:
 
It is a universal packing which can be used for pumps in all types of industry such as chemical, petrochemical, pharmaceutical, food and sugar industries, pulp and paper mills, power stations etc. It is also a durable packing able to withstand granular and abrasive applications, it is recommended for serve in superheated steam, solvents, liquefied gases, sugar syrups and other abrasive fluids.
For hot water applications it can be used un-cooled up to 160<C.
It can be used as stand-alone packing also combined with others as anti-extrusion ring.
PARAMETER:
 
 
Rotating
Reciprocating
Static
Pressure
25 bar
100 bar
200 bar
Shaft speed
25 m/s
1.5 m/s
 
Temperature
100~+280<C
PH range
2~12
Density
Appr. 1.4g/cm3

PACKAGING:
in coils 5 or 10kg, other package on request

SINSTON 2220 PTFE Packing with kevlar corners

SINSTON 2222  PTFE and Kevlar in zebra braided Packing

SINSTON 2230 Graphite PTFE Packing with kevlar corners

SINSTON 2232 Graphite PTFE and Kevlar in zebra braided Packing

 

 

      Copyright @ 2014-2015 Sinston Sealing Material Factory. all rights reserved.                                               Photo: +86 574 63392037   Fax:63441698
      Address: Zonghan Industrial Zone, Cixi City, Zhejiang, P.R. China  PC:315301                                           E-mail: Sales@sinston.com   Martin7757@hotmail.com